Next-generation motherboards will make swapping SSDs and GPUs easier

Daniel Sims

Posts: 1,547   +46
Staff
In a nutshell: Removing a GPU can be one of the most stressful parts of customizing a PC because other components often obscure the release hatch. Motherboard manufacturers recently explored ways to simplify the procedure, and exhibits at Gamescom 2024 reveal that they are still refining new methods.

Motherboard vendors, including Asus and MSI, have begun advertising new mechanisms to help users install and remove PCIe components more quickly and safely. The quality-of-life improvements are small bonuses accompanying significant new features for upcoming motherboards designed for AMD Ryzen 9000 and Intel Core Ultra 200 processors.

Removing a graphics card usually involves pressing a release hatch at the end of the PCIe slot. However, the hatch is often challenging to get to as you need to reach underneath the GPU, especially when removing larger cards. Installing and removing M.2 SSDs can also be a bear because on many boards it requires using screws.

MSI showcased new methods for handling the two parts at its Gamescom 2024 booth using an upcoming Intel 800 series motherboard, which will support Arrow Lake Core Ultra 200 CPUs. Inserting and removing the SSD now only requires pressing a lock button at the rear of the drive. The company also positioned a new GPU slot release button on the side for easy access. An indicator next to the button shows whether it is in the locked or unlocked position. Users must press the button once before installing the GPU, and once again before pulling it out.

The new MSI system resembles one Asus introduced in its Z690 motherboards in 2021. However, Asus has moved on from that design, as YouTuber "der8auer" (Der Bauer) explained when demonstrating the company's recently unveiled X870 boards for AMD's Zen 5 Ryzen 9000 processors.

With the new mechanism, called Q-release, users simply slot the GPU onto the motherboard, but it will only come loose if pulled from the rear. Asus also revised its M.2 connector, introducing a release hatch and an adjustable slider to accommodate SSDs of different sizes.

According to the latest information, X870 and X870E motherboards are expected to begin shipping in October. Spec sheets for Asus and Gigabyte models are now available. Meanwhile, cheaper B850 and B840 boards might not arrive until CES 2025. Intel is set to fully reveal its Z890 motherboards alongside Arrow Lake later this year, but information regarding lower 800 series tiers remains unavailable.

Permalink to story:

 
Hopefully, they'll make the plastic latches more durable. The heat from GPUs often embrittles the latch, causing it to break off. I've only seen this on machines more than three years old. But, it's disconcerting anyway. Maybe it's one of the reasons they plan to move it away from being directly under the GPU.
 
It's not hard right now. If you can't use a screwdriver or press a plastic latch, you have no business inside a computer.
Its true that they're not hard to get to. But, the plastic degrades when unventilated under a hot spot, over time. That design flaw should be rectified.
 
It's not hard right now. If you can't use a screwdriver or press a plastic latch, you have no business inside a computer.

After doing this with a screwdriver for 5+ times the latches that have a metal sheet over it starts to get scratches and little deformations... So it's not very optimal even if you know how to deal with it.

Also some motherboards and GPUs make getting to the latch a pita. I got big hands and my air cooler (Deep Cool Assassin 4) get in the way.
 
It’s all well and good but what about a standard bracket or support mechanism for these egregiously large GPU’s? This is my main reason for doing everything I can to not remove the GPU. It’s getting a little ridiculous at this point and we need a better solution from someone, be that case vendors or gpu designers.

I don’t see them getting any smaller, perhaps we need to rethink the entire design form factor of the modern gpu.
 
Guys, if you need an external tool to get to the latch, then it's time to re-evaluate your locking mechanism.
 
It's not hard right now. If you can't use a screwdriver or press a plastic latch, you have no business inside a computer.

You have a point. But also consider that all it takes is a screw driver slipping off the latch and scratching a few traces to potentially bork your motherboard. Me? I use a cube case where the MB is mounted parallel to the floor and the GPU is upright. Then I just remove the latch all together since my GPU isn't going to go any where.
 
I use a cube case where the MB is mounted parallel to the floor and the GPU is upright. Then I just remove the latch all together since my GPU isn't going to go any where.
If you simply lay the standard case on its side, doesn't that accomplish the same thing? That's how I assemble mine to begin with.
 
You have a point. But also consider that all it takes is a screw driver slipping off the latch and scratching a few traces to potentially bork your motherboard. Me? I use a cube case where the MB is mounted parallel to the floor and the GPU is upright. Then I just remove the latch all together since my GPU isn't going to go any where.
This is what I have use for over 12 years HAF XB ATX PC CASE
 
Back